Rail Plastic Dowel

rail plastic dowel

  • Size: for different sizes of screw spikes or anchor bolts
  • Standard: GB, DIN, UIC, AREMA/ASTM, BS, JIS etc
  • Surface: customization
  • Packing: upon customers

Rail Plastic dowel(Rail Plastic Sleeve)

Rail plastic dowel is also called rail plastic sleeve/plastic insert/concrete dowel/ concrete insert, which is a counter-party fastener for a screw spike or anchor bolt, and it is pre-imbedded into the concrete sleeper or wooden sleeper, installed together with screw spikes, guide plates and rail clips to fasten the rail tracks.

Functions of the rail plastic dowel.

In a set of rail fastening system, the rail plastic dowel can be considered as the fastening foundation, as it needs to be pre-inserted into the concrete sleeper separately before assembling the rail fastening system parts. It is used to guarantee the good connection and linkage of the rail fastening system with the concrete sleeper, with screw spikes or bolts. skl with dowel On the other hand, similarly as the rail pad or rail insulators, the plastic insert’s another function is to insulate the fastener parts from the ties. Therefore, the quality of this small pre-inserted part into the concrete sleeper, especially its strength and fatigue life, is of great importance to the whole rail line. Taking WJ-8 fastening system for an example, the collaboration of anchor bolts and imbedded plastic sleeves in the track slabs makes the tie plate be tightly fastened to rail and sleeper, through rail clips, to fulfill a enough elasticity range, to avoid the rail bolt against becoming loose, and decrease the maintenance work accordingly.

Types of Rail Plastic Dowel

Rail Plastic Dowels are always used in SKL fastening systems, and can be classified according to its materials needed: of PA66 or HDPE, depending on different technical spe cification requirements from clients, as below   HDPE Rail Plastic Dowel of HDPE

Name Rail plastic dowel
Type For different sizes of screw spikes or anchor bolts
Material Reinforced Nylon 66 (PA66: Nylon 66.69%, glass fiber 30%, other 1%) HDPE
Technical
specifications
Density:1.3-1.45g/cm3
Tensile strength: ≥170Mpa
Elongation: ≤4.4%
Bending Strength: ≥250Mpa
Impact Strength(No gap): ≥80KJ/m2
Melting point:250-270°C
Insulation resistance:≥1×108Ω
Glass fiber content:30-35%
Hardness:≥110HRR
Density: 0.95-0.98g/cm3
Tensile strength: ≥19Mpa
Elongation: >80%
Melting point: 170-190°C
Insulation resistance: ≥1×1010Ω
Hardness:≥98A
Color Yellow, black, white, blue, green, just to name a few.